7. Insert the bent joint to the exhaust opening of the flue pipe. Cut the inlet hose for desired length if
necessary. Attach the L-shaped hose to each end of the inlet hose and attach the L-shaped hose to the
intake opening of the flue pipe. Secure the L-shaped hose to the intake opening with the hose band.
Plug the unused exhaust and intake opening with the caps provided with the heater. Make sure the caps
fit tightly onto the opening (See Fig. 10).
NOTE: If the inlet hose is not smoothly inserted into the L-shaped hose, apply water or soap suds to
the inlet hose.
8. Move the heater into position. Connect the bent joint to the exhaust outlet opening (upper opening) and
attach the L-shaped hose to the intake inlet opening. Make sure all connections are tight (See Fig. 11).
Fig. 10
Fig. 11
Outlet Opening
Inlet Opening
L-Shaped Hose
Bent Joint
L-Shaped Hose
Hose Band
Exhaust Air Cap
Intake Air Cap
Exhaust Opening
Bent Joint
Inlet Hose
27
Laser 60AT (E) 11.3.3 0:59 PM Page 27
