3.
Install the ceramic log.
a. Remove four (4) screws from top plate and remove the top plate.
b. Remove four (4) screws from canopy guard and remove the canopy guard. Remove the heat chamber
lid from the heat exchanger.
c. Gently insert the ceramic logs into three (3) brackets inside of burner properly. After inserting the
ceramic logs, install log supporter on the upper holes of the ceramic logs. Adjust the log supporter so
as to place the logs at the center of the burner.
Log supporter
Canopy guard
Top View
<Heat Chamber Lid>
Wrong
Correct
<Canopy Guard>
24
Laser 60AT (E) 11.3.3 0:59 PM Page 24
