Toyota OEKAKI 50 Скачать руководство пользователя страница 93

Страница: 93 / 106

Upper thread
breaks

The upper and lower threads are
incorrectly threaded.

Correctly thread the upper and lower
threads.

32, 34

The thread is tangled in the bobbin case
or race.

Remove lint from the feed dog and
race.

The thread is too thin for the thickness of
the needle.

Use thread suitable for the thickness of
the needle.

The upper thread tension is too tight or
too loose.

Adjust the upper thread tension.

The needle is bent.

Replace the needle.

The point of the needle is blunt/worn
away.

The needle is incorrectly installed.

Correctly install the needle.

The thread is old.

Use new thread.

—

Lower thread
breaks

The lower thread is incorrectly threaded.

Correctly thread the lower thread.

Stitches not
formed / Only
needle holes in
fabric

The upper thread passes from behind
the needle to the front.

Pass the upper thread from the front of
the needle to the back, or use the
needle threader.

37, 38

Thread with a strong twist is being used.

Change the thread, or set the upper
thread tension to a setting between -3
and -2.

The thread is too thin for the thickness of
the needle.

Use thread suitable for the thickness of
the needle.

Stitches
formed, but
easily pulled
out

Reverse stitches are not used.

Sew reverse stitches.

The upper thread tension is incorrect.

Adjust the upper thread tension.

Lower thread
not taken up

The needle is bent.

Replace the needle.

The needle is incorrectly installed.

Correctly install the needle.

Fabric not fed

The feed dog is lowered.

Use the drop feed lever to raise the
feed dog.

There is lint in the feed dog.

Remove lint from the feed dog and
race.

The stitch length is set to “0”.

Adjust the stitch length to an
appropriate setting.

Synthetic leather or vinyl is being sewn.

Use the non stick foot.

Sewing speed
not changing

You are trying to use the foot controller
to change the sewing speed in OEKAKI
(free-motion embroidering) mode.

In OEKAKI mode, use the operation
panel buttons to change the “sewing
speed” setting.

Trouble

Cause

Countermeasure

Page

Содержание OEKAKI 50











































































































Результаты поиска

Содержание OEKAKI 50

Отзывы:

Бренды по названию

Популярные бренды

Toyota OEKAKI 50, Инструкция по эксплуатации

Результаты поиска

Содержание OEKAKI 50

Отзывы:

Бренды по названию

Популярные бренды