Toyota OEKAKI 50 Скачать руководство пользователя страница 103

Страница: 103 / 106

103

Storage precautions

■

Storing

Observe the following precautions when storing. Not doing so could cause damage, discoloration or breakage.
•

Do not store in a location exposed to humidity or excessive dust.

* We recommend storing the sewing machine covered with the included soft cover.

•

Do not store in a location exposed to direct sunlight or near a heater.

•

Do not store on an unstable surface.

•

Do not store upside down or laying down.

•

Do not store in a location exposed to smoke or steam.

Note

•

Do not use the sewing machine for industrial purposes. Doing so could cause damage from being
overloaded.

•

The sewing machine is not guaranteed for use in industrial applications.

•

Due to product quality improvements, the specifications or appearance of this machine may change without
notice.

•

The contents of this Instruction Manual may not be duplicated without permission.

•

The contents of this Instruction Manual are subject to change without notice.

Caution

Do not store the sewing machine within the reach of children.

They could touch the needle and be injured.

Содержание OEKAKI 50











































































































Результаты поиска

Содержание OEKAKI 50

Отзывы:

Бренды по названию

Популярные бренды

Toyota OEKAKI 50, Инструкция по эксплуатации

Результаты поиска

Содержание OEKAKI 50

Отзывы:

Бренды по названию

Популярные бренды