Toyota OEKAKI 50, Инструкция по эксплуатации

Страница: 58 / 106

58
■
Overcasting
For video tutorial, visit http://www.toyotaoekakisewing.com
This is a sewing method that prevents unraveling at the edge of the fabric.
❑
When using the overcasting foot
1
Select the stitch in the operation panel.
* Check that the OEKAKI (free-motion embroidering) button is not lit.
* Refer to “Selecting the stitch” (page 44).
2
Select the stitch width and stitch length.
* Refer to “Selecting the stitch width” (page 45) and “Selecting the stitch length” (page 46).
3
Press the (needle up/down) button to raise the needle.
4
Position the fabric under the presser foot, and then lower the presser foot lever.
5
Sew with the edge of the fabric against the guide on
the foot.
* By sewing with the fabric against the guide, the stitching can be
sewn without having to constantly check the needle entry point.
Caution
When using the overcasting foot, select stitch number 4, 8, 10 or 13, and set the stitch
width to 5.0.
Not doing so could cause the needle to hit the presser foot and break, which may result in
injuries.
Caution
After changing the stitch width, slowly turn the handwheel and check that the needle
does not hit the presser foot.
Not doing so could break the needle and cause injuries.
OEKAKI
button
not lit
Suitable stitch
4 8 10 13
Presser foot to be used
Overcasting
foot
Guide