Toyota COROLLA CROSS, Руководство пользователя

Страница: 447 / 612

447
7-1. Maintenance and care
7
Maintena
nce
a
nd
ca
re
brakes several times to dry the
parts.
■
Bumpers and side moldings (if
equipped)
Do not scrub with abrasive cleaners.
■
Plated portions
If dirt cannot be removed, clean the
parts as follows:
●
Use a soft cloth dampened with an
approximately 5% solution of neu-
tral detergent and water to clean
the dirt off.
●
Wipe the surface with a dry, soft
cloth to remove any remaining
moisture.
●
To remove oily deposits, use alco-
hol wet wipes or a similar product.
WARNING
■
When washing the vehicle
Do not apply water to the inside of
the engine compartment. Doing
so may cause the electrical com-
ponents, etc. to catch fire.
■
Precautions regarding the
exhaust pipe
Exhaust gasses cause the
exhaust pipe to become quite hot.
When washing the vehicle, be
careful not to touch the pipe until it
has cooled sufficiently, as touch-
ing a hot exhaust pipe can cause
burns.
■
Precaution regarding the rear
bumper
If the paint of the rear bumper is
chipped or scratched, the follow-
ing systems may not function cor-
rectly. If this occurs, consult your
Toyota dealer.
●
BSM (if equipped)
●
RCTA (if equipped)
●
PKSB (if equipped)
NOTICE
■
To prevent paint deteriora-
tion and corrosion on the
body and components (alumi-
num wheels, etc.)
●
Wash the vehicle immediately in
the following cases:
• After driving near the sea coast
• After driving on salted roads
• If coal tar or tree sap is present
on the paint surface
• If dead insects, insect droppings
or bird droppings are present on
the paint surface
• After driving in an area contami-
nated with soot, oily smoke,
mine dust, iron powder or chem-
ical substances
• If the vehicle becomes heavily
soiled with dust or mud
• If liquids such as benzene and
gasoline are spilled on the paint
surface
●
If the paint is chipped or
scratched, have it repaired
immediately.
●
To prevent the wheels from cor-
roding, remove any dirt and
store in a place with low humid-
ity when storing the wheels.
■
Cleaning the exterior lights
●
Wash carefully. Do not use
organic substances or scrub
with a hard brush.
This may damage the surfaces
of the lights.
●
Do not apply wax to the sur-
faces of the lights.
Wax may cause damage to the
lenses.
www.carobook.com