Toyota COROLLA CROSS, Руководство пользователя

Страница: 117 / 612

117
3-2. Opening, closing and locking the doors
3
Before driving
The power back door system
can be enabled/disabled on the
multi-information display.
(

P.563)
1
Press or of meter con-
trol switches and select .
2
Press or of meter con-
trol switches, select the
“Vehicle Settings” and then
press and hold .
3
Press or of the meter
control switches, select
“PBD” and then press .
4
Press or of the meter
control switches, and then
select “System Settings”.
5
ON and OFF will be switched
when is pressed.
When OFF is selected and the
operations of the power back door
is made to stop from the of
NOTICE
■
Back door spindles
The back door is equipped with
spindles that hold the back door in
place.
Observe the following precau-
tions. Failure to do so may cause
damage to the back door spindle,
resulting in malfunction.
●
Do not attach any foreign
objects, such as stickers, plastic
sheets, or adhesives to the
spindle rod.
●
Do not attach any accessories
other than genuine Toyota parts
to the back door.
●
Do not place your hand on the
spindle or apply lateral forces to
it.
■
To prevent back door closer
malfunction
Do not apply excessive force to
the back door while the back door
closer is operating. Applying
excessive force may cause the
back door closer to malfunction.
■
To prevent malfunction of the
power back door
●
Make sure that there is no ice
between the back door and
frame that would prevent move-
ment of the back door. Operat-
ing the power back door when
excessive load is present on the
back door may cause a mal-
function.
●
Do not apply excessive force to
the power back door while the
back door is operating.
●
Take care not to damage the
sensors (installed on the right
and left edges of the power
back door) with a knife or other
sharp object. If a sensor is dis-
connected, the power back door
will not close automatically.
Enabling/disabling the
power back door system
(vehicles with a power
back door)
www.carobook.com