Toyota Corolla 1998 страница 136 Скачать руководство пользователя

Страница: 136 / 204

1998 COROLLA(U)

144

Remember that when making a turn,

the trailer wheels will be closer than

the vehicle wheels to the inside of the
turn. Therefore, compensate for this by

making a larger than normal turning

radius with your vehicle.

Crosswinds and rough roads will ad-

versely affect handling of your vehicle

and trailer, causing sway. Pay attention
to the rear from time to time to pre-

pare yourself for being passed by large

trucks or buses, which may cause your
vehicle and trailer to sway. If swaying

happens, firmly grip the steering wheel

and reduce speed immediately but
gradually. Never increase speed. Steer

straight ahead. If you make no extreme

correction with the steering or brakes,
the vehicle and trailer will stabilize.

Be careful when passing other ve-
hicles. Passing requires considerable

distance. After passing a vehicle, do

not forget the length of your trailer and
be sure you have plenty of room be-

fore changing lanes.

In order to maintain engine braking effi-

ciency do not use fifth gear (manual

transmission) or overdrive (automatic
transmission).

Because of the added load of the trail-

er, your vehicle’s engine may overheat
on hot days (at temperatures over

C [85

F]) when going up a long or

steep grade with a trailer. If the engine
coolant temperature gauge indicates

overheating, immediately turn off the air

conditioning (if in use), pull off the road
and stop in a safe spot. Refer to ”If

your vehicle overheats” in Part 4 of

this manual.

Always place wheel blocks under both

the vehicle and trailer wheels when
parking. Apply the parking brake firmly.

Put the transmission in ”P” (automatic)

or in first or reverse (manual). Avoid
parking on a slope with a trailer, but

if it cannot be avoided, do so only

after performing the following:

1. Apply the brakes and hold.
2. Have someone place wheel blocks un-

der both the vehicle and trailer wheels.

3. When the wheel blocks are in place,

release your brakes slowly until the
blocks absorb the load.

4. Apply the parking brake firmly.
5. Shift into first or reverse (manual) or

”P” (automatic) and turn off the engine.

When restarting out after parking on a
slope:

1. With the transmission in ”P” position

(automatic) or the clutch pedal de-

pressed (manual), start the engine.

(With an automatic transmission, be
sure to keep the brake pedal de-

pressed.)

2. Shift into gear.
3. Release the parking brake (also foot

brake on automatic transmission ve-
hicles) and slowly pull or back away

from the wheel blocks. Stop and apply

your brakes.

4. Have someone retrieve the blocks.

Содержание Corolla 1998













































































































































































































Результаты поиска

Содержание Corolla 1998

Отзывы:

Похожие инструкции для Corolla 1998

Бренды по названию

Популярные бренды

Toyota Corolla 1998, Руководство пользователя

Результаты поиска

Содержание Corolla 1998

Отзывы:

Похожие инструкции для Corolla 1998

Бренды по названию

Популярные бренды