Toyota Corolla 1998 Скачать руководство пользователя страница 29

Страница: 29 / 204

1998 COROLLA(U)

Keep as low on hip
bone as possible

Keep as low on hips
as possible

Too high

Take up

slack

Adjust the position of the lap and

shoulder belts.

Position the lap belt as low as possible

on your hips—not on your waist, then ad-
just it to a snug fit by pulling the shoulder

portion upward through the latch plate.

CAUTION

High

−

positioned lap belts and

loose

−

fitting belts both could in-

crease the chance of injury due to

sliding under the lap belt during an
accident or other unintended result.

Keep the lap belt as low on your

hips as possible.

For your safety, do not place the

shoulder belt under your arm.

To release the belt, press the buckle

−

re-

lease button and allow the belt to re-
tract.

If the belt does not retract smoothly, pull
it out and check for kinks or twists. Then

make sure it remains untwisted as it re-

tracts.

Содержание Corolla 1998













































































































































































































Результаты поиска

Содержание Corolla 1998

Отзывы:

Toyota Corolla 1998, Руководство пользователя, Страница: 29 / 204

Результаты поиска

Содержание Corolla 1998

Отзывы: