Toyota Corolla 1998 страница 41 Скачать руководство пользователя

Страница: 41 / 204

1998 COROLLA(U)

This SRS airbag system has a service

reminder indicator to inform the driver of
operating problems. If either of the

following conditions occurs, this indicates

a malfunction of the airbags. Contact your
Toyota dealer as soon as possible to

service the vehicle.

The light does not come on when the

ignition key is turned to the ”ACC” or

”ON” position, or remains on.

The light comes on while driving.

In the following cases, contact your Toyota

dealer as soon as possible:

The SRS airbags have been inflated.

The front part of the vehicle (shaded
in the illustration) was involved in an

accident not of the extent to cause the

SRS airbags to inflate.

The pad section of the steering wheel

or front passenger airbag cover
(shaded in the illustration) is scratched,

cracked, or otherwise damaged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

SRS side airbags

The SRS (Supplemental Restraint Sys-

tem) side airbags are designed to pro-
vide further protection for the driver

and front passenger when added to the

primary protection provided by the seat
belts.

In response to a severe side impact, the
SRS side airbags work together with the

seat belt to help prevent or reduce injury

by inflating, in order to decrease the im-
pact mainly on the driver’s or front pas-

senger’s chest. The SRS side airbag on

the passenger seat is activated even with
no passenger in the front seat.

Содержание Corolla 1998













































































































































































































Результаты поиска

Содержание Corolla 1998

Отзывы:

Похожие инструкции для Corolla 1998

Бренды по названию

Популярные бренды

Toyota Corolla 1998, Руководство пользователя

Результаты поиска

Содержание Corolla 1998

Отзывы:

Похожие инструкции для Corolla 1998

Бренды по названию

Популярные бренды