Toyota Corolla 1998 страница 85 Скачать руководство пользователя

Страница: 85 / 204

1998 COROLLA(U)

SETTING AT A DESIRED SPEED

On vehicles with automatic transmission,
the transmission must be in ”D” before

you set the cruise control speed.
Bring your vehicle to the desired speed,

push the lever down in the ”SET/COAST”

direction and release it. This sets the ve-
hicle at that speed. If the speed is not

satisfactory, tap the lever up for a faster

speed, or tap it down for a slower speed.
Each tap changes the set speed by 1.6

km/h (1.0 mph). You can now take your

foot off the accelerator pedal.

If you need acceleration—for example,

when passing—depress the accelerator

pedal enough for the vehicle to exceed
the set speed. When you release it, the

vehicle will return to the speed set prior

to the acceleration.

CAUTION

For manual transmission:
While driving with the cruise control

on, do not shift to neutral without

depressing the clutch pedal, as this
may cause engine racing or overrev-

ving.

CANCELLING THE PRESET SPEED

You can cancel the preset speed by:
a. Pulling the lever in the ”CANCEL”

direction and releasing it.

b. Depressing the brake pedal.

c. Depressing the clutch pedal (manual

transmission).

If the vehicle speed falls below about 40
km/h (25 mph), the preset speed will auto-

matically cancel out.
If the vehicle speed drops 16 km/h (10
mph) below the preset speed,the preset

speed will also automatically cancel out.

If the preset speed automatically cancels

out other than for the above cases, have

your vehicle checked by your Toyota deal-
er at the earliest opportunity.

RESETTING AT A FASTER SPEED

Push the lever up in the ”RES/ACC” direc-

tion and hold it. Release the lever when

the desired speed is attained. While the
lever is held up, the vehicle will gradually

gain speed.
However, a faster way to reset is to ac-
celerate the vehicle and then push the

lever down in the ”SET/COAST” direction.

RESETTING AT A SLOWER SPEED

Push the lever down in the ”SET/COAST”

direction and hold it. Release the lever
when the desired speed is attained. While

the lever is held down, the vehicle speed
will gradually decrease.
However, a faster way to reset is to de-

press the brake pedal and then push the
lever down in the ”SET/COAST” direction.

Содержание Corolla 1998













































































































































































































Результаты поиска

Содержание Corolla 1998

Отзывы:

Похожие инструкции для Corolla 1998

Бренды по названию

Популярные бренды

Toyota Corolla 1998, Руководство пользователя

Результаты поиска

Содержание Corolla 1998

Отзывы:

Похожие инструкции для Corolla 1998

Бренды по названию

Популярные бренды