TOX PRESSOTECHNIK FinePress PFHL 008.002 Скачать руководство пользователя страница 10

Страница: 10 / 34

Pneumatic press PFHL

PFHW

OM 45.PFHL-PFHW.201803.en

Transport, assembly and operation

During transport and assembly of the machine,

the indicated part dimensions and part weights

of the machine including tool and accessories

must be observed.
The machine must only be mounted by author-

ized and briefed staff.
Check the machine and the accessories for dam-

ages. A defective machine must be immediately

stopped and the plant must be secured against

reclosing.
A defective machine must only be repaired by

specialists or by TOX

PRESSOTECHNIK.

Before beginning work, check all supply pipes for

damages. If any damage is detected, depressur-

ize the pipe or the pneumatic system and have

the damaged pipes changed by authorized spe-

cialists.

Observe machine data

The technical data stated in the

data sheet and the settings must

be observed.
Observe the information in the op-

erating manual as well as the in-

struction and warning plates on the

machine.

Danger to persons

During the operation of the ma-

chine the user must ensure that no-

body is at risk due to potentially

dangerous actions.
The machine must only be oper-

ated, if nobody stays within the

danger area.

Individual protective equipment

Depending on the intended use of the

press, personal protective equipment

(PPE) might be necessary.
According to the national regula-

tions for working safety, the PPE to

be used for the intended use must

be defined in the operator's work-

ing instruction.

Maintenance and repair

Safety regulations

When working on the machine, al-

ways observe the applicable safety

regulations and the legal condi-

tions.

Keep the recommended intervals for mainte-

nance and inspection work.
The qualified repair of products from TOX

PRESSOTECHNIK requires trained specialized

personnel. The operator or the persons charged

with the repair must take care that the staff is

specially trained for the repair of the product.

Persons engaged in repairing the machine are

always responsible for the working safety.

Do not start repair and maintenance work until it has

been ensured that

•

the machine is separated from the com-

pressed air supply,

•

the machine is switched off and protected

against restarting,

•

dangerous motions have come to a stop,

•

an unauthorized, accidental or unexpected

putting into operation and an initiation of dan-

gerous motions due to latent energies is pre-

vented.

Only use original spare parts from TOX® PRES-

SOTECHNIK.

Assemble the press completely

After repair or maintenance work,

duly remount all covers dismounted

before. Check also the screwing

and the tightness of all connections

of pneumatically driven accesso-

ries.

Do not modify the machine!

Arbitrary conversions or alterations

(of mechanics, hydraulics, or pneu-

matics) endanger the safety of per-

sonnel, of the whole machine, or of

other material assets.

Содержание FinePress PFHL 008.002



































Результаты поиска

Содержание FinePress PFHL 008.002

Отзывы:

Похожие инструкции для FinePress PFHL 008.002

Бренды по названию

Популярные бренды

TOX PRESSOTECHNIK FinePress PFHL 008.002, Руководство по эксплуатации

Результаты поиска

Содержание FinePress PFHL 008.002

Отзывы:

Похожие инструкции для FinePress PFHL 008.002

Бренды по названию

Популярные бренды