Pneumatic press PFHL / PFHW
OM 45.PFHL-PFHW.201803.en
19
Mounting the sliding table (option)
Legend
1 Base plate (anvil)
6 Handle
2
Guide
7 Fastening groove press
3
Tool plate
8 Oblong hole for screw fitting
4
Set screw for stop
9 Bore hole for screw fitting
5
Stop (adjustable)
For precise centring of the slide table you can
use the bore holes (
9
). There are already
mounted fastening screws and T-groove
nuts. Push the T-groove nuts into the fas-
tening groove of the press and screw the fas-
tening screws tight. If another position of the
slide table is required, it is possible to fasten
the slide table with the help of the oblong
holes (
8
) using the T-groove nuts and suita-
ble screws.
Align the lower tool on the tool plate (
3
) and
tighten it in the provided threaded bore holes.
For fine adjustment of the insertion length, it
is possible to shift the stop (
5
) and to secure
it with the set screw (
4
).
Slide table with pneumatic cylinder
Retrofitting
If the pneumatic cylinder (
12
) is
mounted to the slide table at a later
date, first fasten the angle (
15
) to
the provided location of the base
plate. Then lead the piston through
the opening of the angle and fasten
the cylinder with the nut. Screw
then the coupling of the piston
down to the retainer of the slide ta-
ble (
17
).
Duly connect the pneumatic cylinder to the
compressed air supply:
−
Forward stroke (
11
): Extension of cylinder
−
Return stroke (
13
): Retraction of cylinder
Use the throttles (
10
) and (
14
) to set the
speed for the extension or retraction of the
cylinder.
For fine adjustment of the insertion length, it
is possible to shift the stop (
5
) and to secure
it with the set screw (
4
).
Legend
10
Throttle, forward stroke
11
Connection forward stroke
12
Pneumatic cylinder
13
Connection return stroke
14
Throttle, return stroke
15
Angle bracket
16
Coupling cylinder piston
17
Slide table fixing device
Mounting of TDC / BDC sensors
It is possible to screw suitable sen-
sors for TDC/BDC inquiry (acces-
sories) to the pneumatic cylinder
(
12
).
9 8
7
13 14
15
1 2 3 4 5 6
10 11
12
16
17
Содержание FinePress PFHL 008.002
Страница 2: ...Pneumatic press PFHL PFHW 2 OM 45 PFHL PFHW 201803 en ...
Страница 30: ...Pneumatic press PFHL PFHW 30 OM 45 PFHL PFHW 201803 en ...
Страница 31: ......
Страница 32: ......
