Town & Country Fireplaces TCWS38, Руководство по установке, Страница: 9 / 44

NON-COMBUSTIBLE
BOARD
If fi nishing the wall above the unit with paint,
the framing kit shipped with the unit should
be discarded. Use full sheets of calcium
silicate board or equivalent and full length
metal studs to fi nish and frame around the
unit.
Calcium silicate board is a high grade
material with cement, quartz and natural
minerals as the main raw materials. (Note:
Calcium Silicate is 1/2” thick)
CAUTION: Calcium Silicate board can be
damaged if dropped or struck. Handle with
care. Inspect board prior to installation and
do not use if cracked.
NOTE: It is recommended to pre-drill
mounting holes in the board prior to securing
to the framing. This will prevent the board
from cracking.
MINIMUM COMBUSTIBLE FRAMING DIMENSIONS
NOTE: Fireplace should be in its fi nal location before framing.
NON-COMBUSTIBLE RECESSED
INSTALLATION DETAIL
This fi replace may be recessed up
to a maximum depth of 4 1/2”. This
recess must be constructed from
non- combustible material.
Finishing material must not pro-
trude past framing fl anges under
ANY circumstance. The safety
screen and the window, with trim
fi tted, must be able to move freely.
Calcium silicate board
Non - combustible board area
NON-COMBUSTIBLE MATERIAL
MUST EXTEND 11 7/8" ABOVE
AND 10 1/8" TO THE SIDES OF
THE FRAMING EDGES.
NON-COMBUSTIBLE
BOARD IN THESE
AREAS
11 7/8”
10 1/8”
Figure 10: Non-combustible board within frame.
Figure 11: TCWS38D Recessed installation details.
Figure 12: Non-combustible board
location.
61 5/8"
26 11/16"
72"
37 3/4"
72"
1/2"
61 5/8"
101 13/16"
45 1/8"
61 5/8"
RANGE
22 1/2"
to
24 3/8"
24 7/8”
RANGE
1/2" - 2 1/2"
11 3/4"
FRAMING
LINTEL
Figure 13: TCWS38D Minimum combustible framing dimensions.
5056.42523D2
9
TCWS38Dver2_140817-44