Town & Country Fireplaces TCWS.54CODE, Инструкция по установке и эксплуатации

Страница: 9 / 36

The standoffs are shipped loose inside the fireplace and must be installed on the top and the side of the fireplace as
shown in (Figure 10). Do this once the fireplace is on site and in position.
In planning the installation for the fireplace, it is necessary to determine where the unit is to be installed, location of vent
system and where gas supply piping may be plumbed. Various installations are possible, such as, into an existing wall,
a corner, a built-in wall or a wall projection (Figure 11). Due to high temperatures, do not locate this fireplace in areas of
high traffic or near furniture or draperies.
The minimum clearances from the fireplace to combustible surfaces must be adhered to and are shown in (Figure 6) &
(Figure 7).
Figure 11: TCWS54CODE Possible locations.
EXAMPLES OF COMMON LOCATIONS
SEE FIG #15 FOR DIMENSIONS
TOP STANDOFFS
SIDE
STANDOFF
(THIS SIDE ONLY)
Figure 10: TCWS54CODE standoffs.
HANDLE
CONTROL
BOX
9
TCWS.54CODE_041115-36 5055.5401-A
Locating The Fireplace
Standoffs