5056.42562
1 in.
Max 4 1/2
12
TC54_D 030615-40
Adjustable Lintel
1. The adjustable lintel assembly has
two orientations for desired finishing.
A flanged edge and a hemmed edge.
The lintel comes factory installed with
the flange edge out. If the desired edge
is different from the factory setting,
use the following steps to change the
screen.
2. Remove saftey barrier screen.
3. Remove the window trim (Fig.#17).
4. Loosen the securing bolts in the upper
and lower corners on each side of the
lintel and remove the lintel. Rotate the
assembly to have the desired edge away
from the fireplace(Fig .#18).
5. The lintel assembly can then be adjusted
to align flush with your facing material by
sliding in or out approximately 1”.
6. Tighten the securing bolts. (Fig.#18).
7. Re-attach the window trim.
8. Reinstall safety barrier screen.
WINDOW TRIM
Fig. #18
3/8 SECURING BOLT
FLANGED EDGE
HEMMED EDGE
Fig. #17
SAFETY BARRIER
SCREEN
