5056.42562
Program button
Using the Remote Control Transmitter
Fig. #49 Town & Country wall
switch face plate.
Fig. #47 wall switch electronics
Fig. #48 wall switch batteries side
Fig. #50 Remote Control
Transmitter battery bay
Fig. #51 Display in Fahrenheit
Fig. #52 Display in Celcius
Temperature indication Display
With the remote control transmitter in the “OFF” position, press the thermostat
and mode keys at the same time. Look at the LCD screen on the remote control
transmitter to verify that a C or F is visible to the right of the room temperature
display. (Fig. 51 & Fig. 52)
Turn on the Fireplace
With the fi replace OFF, press the ON/OFF key on the remote control transmitter.
The remote control transmitter display will show the active icons on the screen.
At the same time the wall switch will activate the fi replace via the IFC module. A
single “beep” from the IFC module will confi rm reception of the command.
Turn off the Fireplace
With the fi replace ON, press the ON/OFF key on the remote control transmitter.
The remote control transmitter LCD display will only show the room temperature
(Figs. 51 or 52). At the same time the IFC module will turn off the fi replace. A
single “beep” from the IFC module confi rms reception of the command.
Manual Bypass of the Remote Fireplace
If the batteries of the remote control transmitter are low or depleted, the fi replace
can be turned off manually using ON/OFF switch located on Town & Country wall
switch. This will bypass the remote control transmitter.
32
TC54_D 030615-40
