Tower Hobbies KAOSARF .60/EP, Инструкция по эксплуатации

Страница: 7 / 24

7
❏
9. Glue the plastic alignment dowels into the end of
each wing.
FUSELAGE
Mount the Tail
❏
1. Glue a short and long alignment peg into the bottom
of the vertical stabilizer – do not glue the long alignment
peg into the back of the vertical stab.
❏
2. Fit the vertical stab to the horizontal stab, keying in
the peg.
❏
3. Insert another long peg up through the horizontal and
vertical stab, but do not glue it in.
❏
4. Key the assembly into the fuselage with the threaded
rods protruding down through the bottom of the fuselage.
❏
5. Use the included finger socket wrench to tighten the
assembly to the fuselage with an M3 flat washer and M3
locking nut on each rod. Do not over tighten – just enough
to tighten up the gap between the bottom of the stab and
the fuselage.