Tower Hobbies KAOSARF .60/EP, Инструкция по эксплуатации

Страница: 15 / 24

15
❏
E. Add the hardwood triangle stock to the back plate and
front plate around the corners of the sides, top and bottom.
Refer to these photos to mount the motor mount box, the
motor and ESC.
❏
2. Mount the motor mount box to the firewall with four
M4 x 25 SHCS, M4 lock washers and flat washers, then
mount the motor with four M4 x 20 SHCS and M4 washers
and lock washers.
❏
3. Prepare the ESC by soldering on bullet connectors
and a battery connector, then mount the ESC with #4 x
3/8" or M3 x 10 screws (not included). Connect the motor
wires to the ESC.
NOTE: If using a different ESC that does not fit on the motor
mount box inside the cowl, the ESC could be mounted in
the fuselage behind the firewall, but accommodations such
as cutting cooling holes in the fuselage should be made for
cooling the motor.
❏
4. Follow the cowl mounting and cutting instructions for
the glow engine on page 11 to cut and mount the cowl for
the electric motor as shown – be certain to open holes for
adequate motor/ESC cooling.