TOUGH-WORKS TLGS625, Инструкция по эксплуатации

Страница: 6 / 20

6
TLGS625
MINIMUM GAUGE FOR CORD SETS
Use proper extension cords. Make sure your extension
cord is in good condition and is a 3-wire extension
cord which has a 3-pronged grounding type plug
and matching receptacle which will accept the ma-
chine’s plug. When using an extension cord, be
sure to use one heavy enough to carry the current
of the machine. An undersized cord will cause a
drop in line voltage, resulting in loss of power and
overheating. The table shows the correct gauge
to use depending on the cord length. If in doubt,
use the next heavier gauge. The smaller the gauge
number, the heavier the cord.
Ampere rating of
the tool
(120V circuit only)
More
than
Total length of cord
Minimum Gauge for the
extension cord (AWG)
Not more
than
In all cases,make certain the receptacle in que-
stion is properly grounded.
If you are not sure,have a electrician check the
receptacle.
WARNING!
!
ELECTRICAL SAFETY