TOUGH-WORKS TLGS625, Инструкция по эксплуатации

Страница: 15 / 20

BD4603
15
TLGS625
8. Replacement wheels must have a mi-
nimum rated No Load Speed and a
diameter as listed in the Specifications
section.
Many belts are available with different grit
sizes.
To remove/replace a sanding belt:
1. Disconnect the machine from the power
supply.
2. Remove the star knob from the right-
hand sanding belt cover as shown (in
Fig 13) and remove the cover.
3. Loosen the sanding belt tension knob,
as shown (in Fig 14).
4. Pull the sanding belt tension knob down
with one hand and work the sanding belt
off the rollers with the other hand as
shown( in Fig15).
5. Install the new sanding belt in the reverse
order of removal and replace the belt
cover.
6. Track the new sanding belt before tu-
REPLACING SANDING BELT
Figure 13
Figure 14
Figure 15
rning the machine on (see Belt Tracking).
MAINTEN
ANCE