Page -5-
Installation: Electrical
PowerTouch Remote Control Systems - 814 Series (2 - 4) Functions
Manual C814.N2
1) Install Power
Connect the Red wire to a co12v battery power source. Note: For best performance, run a
clean +12v (300mA) directly from the battery or a fuse that is NOT supplying any power to motors,
lights or any other type of high current device.
2) Install Ground
Connect the Black wire to chassis ground
A) Scrape all paint and grease away from the body frame.
A loose chassis ground connection WILL cause intermittent operation of receiver.
B) Clean the area using an alcohol based cleaner to remove paint chips and grease.
C) Crimp a #10, 3/16” ring terminal onto the black ground wire.
D) Insert the ring terminal and a #10, 3/16” star washer over a 10x3/4” hex head,
self-tapping ground screw.
E) Tighten ground screw securely into clean frame area.
3) Install Outputs - Maximum output is 300mA
A) Connect
only
One
Channel output wire at a time to a relay or function which uses 300mAor
less. (On channels 1 and 2; choose
either
the negative or the positive wires, NOT both)
B) Solder connections and protect with shrink tube or use an 18g insulated butt terminal.
Channel
Channel 1
Channel 2
Channel 3
Channel 4
Output
(+) positive
OR
(-) negative
(+) positive
OR
(-) negative
(-) negative
(-) negative
Wire Color
Violet
OR
Green/Black
Pink
OR
Yellow/Black
Brown
Blue
Max Output
300mA
300mA
300mA
300mA
300mA
300mA
Pin Position
2
4
3
5
6
7
WARNING!
If the output wires are installed to the wrong polarity, the output will be damaged. For example: if
the channel 2 pink (+12) output wire is connected to a ground, a ‘dead short’ will occur when the
button is pressed. The output will test ‘dead’ and the trace may be burned or test ‘high (On)’ at all
times.
4) Wiring Inspection
A) Check all wiring connections visually
B) Check the polarity of all wires
30
87a
85
86
87
Relay 1
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
(
-
)
Battery
(
+
)
M
Chassis
Ground
Chassis
Ground
Ground
Sample
Installation
With a Relay
See Diagram on Page 4
30
87a
85
86
87
Relay Schematic
Red
Violet
Pink
Green/Black
Yellow/Black
Brown
Blue
Black
