Note
2
<Remedial method>
Grip bar
T110D43
Clamping set
Fixing position: 1 position
・
Continuous-thread stud: 4 pieces
・
Washer: 8 pieces
・
Nut: 12 pieces
M6×150
<Fixing bracket list>
T110D37
T110D22R
T110D15(L=70)
T110D16(L=50)
T110D23(L=33)
t=3.2
φ
4×16
250
150
Mounting bracket for
light-gauge steel frame
Fixing position: 1 position
・
Mounting bracket: 1 piece
・
Drilling screw: 10 pieces
T110D36
φ
4×16
t=3.2
250
150
340
150
Mounting bracket for
light-gauge steel frame
Fixing position: 2 positions
(top and bottom)
・
Mounting bracket: 1 piece
・
Drilling screw: 10 pieces
T110D44
M6×50
Bolt set
(for light-gauge steel
frame)
Fixing position: 1 position
・
Bolt: 4 pieces
・
Washer: 4 pieces
T110D45
φ
5×45
Drilling screw set
(for light-gauge steel
frame)
Fixing position: 1 position
・
Drilling screw: 4 pieces
・
Washer: 4 pieces
T110D46
M6×50
M6
Mechanical nut set
(for light-gauge steel
frame)
Fixing position: 1 position
・
Mechanical nut: 4 pieces
・
Bolt: 4 pieces
・
Washer: 4 pieces
T110D26
<Fixing bracket list>
Anchor bolt
Fixing position: 1 position
・
Anchor bolt: 4 pieces
L
M6
T110D3R
(L=85)
T110D18R
(L=105)
Coach screw
Fixing position: 1 position
・
Coach screw: 4 pieces
・
Washer: 4 pieces
L
φ
6
Resin plug
Fixing position: 5 positions
・
Resin plug: 20 pieces
φ
8×40
Clamping bracket
(40 mm-thick,
for additional installation
to a toilet booth)
Fixing position: 1 position
・
Mounting plate: 1 piece
・
Bolt: 4 pieces
・
Washer, nut, and resin pipe:
4 pieces each
Use the outer bolt holes
M6×55
Resin
pipe
φ
13
Fixing with hanger
bolts
Fixing position: 1 position
・
Hanger bolt: 4 pieces
・
Washer and nut: 4 pieces each
M6×11
φ
6×L
Hanger
bolt
T110D34
(L=50)
T110D35
(L=30)
(Unit: mm)
2
-2
. Before Installation
About the resin coating type grip bar
Shape
Part No.
Details of the set
Name
<Fixing bracket list>
(Unit: mm)
Shape
Part No.
Details of the set
T110D41
T110D11
T110D62
T110D42
Mounting plate
Fixing position: 1 position
・
Mounting plate: 1 piece
φ
8
M6
100×100×t6
Welding set
Fixing position: 1 position
・
Continuous-thread stud: 4 pieces
・
Washer: 4 pieces
・
Nut: 8 pieces
M6×60
Embedding set
Fixing position: 1 position
・
Continuous-thread stud: 4 pieces
・
Washer: 4 pieces,
・
Nut: 8 pieces
・
Anchor bolt: 4 pieces
M6×60
M6×50
Name
Mounting plate
Fixing position: 2 positions
(top and bottom)
・
Mounting plate: 1 piece
260
150
φ
8
M6
t6
100
3
-1
. Fixing Brackets (Optional Parts)
●
If the resin coating type grip bar gets scratched on its surface, it cannot
be repaired. Therefore, please handle the product with care.
●
As the surface of the resin coating type grip bar is made of soft resin, if a
tool or the like hits the grip bar, the surface of the grip bar may get
dented. In that case, remedy it by the following procedure.
Apply hot air to the dented portion with a hair dryer for about 2 or 3 minutes.
*The time to apply hot air varies depending on the degree of the dent.
Remedy it while checking its recovering condition.
Do not apply hot air to the soft resin on the surface of
the resin coating type grip bar too long. Doing so may
cause the soft resin portion to burn or change in color.
