Notes
13
Fixing bracket part number T110D36,T110D37,T110D45
Fixing bracket part number
T110D36,T110D37,T110D46
Flange
Cover
Finished wall surface
Finished
wall surface
Plywood, etc.
Mounting bracket
Drilling screw
Washer
Fixing bracket part number T110D36,T110D37,T110D44
Flange
Cover
Plywood, etc.
Mounting bracket
Through hole (
φ
12)
Bolt
Mechanical nut
Washer
Flange
Cover
Finished wall surface
Plywood,
etc.
Mounting bracket
Through hole
(
φ
8)
Through hole (
φ
8)
Prepared hole
(
φ
3 to
φ
3.5)
Bolt
Prepared
hole for M6
tapping
(
φ
5.1)
Washer
Reinforcing material
(t 2.3 or more)
Stud
Mounting bracket
①
In the handrail mounting position, fix the
mounting bracket for light-gauge steel frames
to the reinforcing light-gauge steel frames (t 2.3
mm or more) with drilling screws.
②
After finishing the wall, carry out handrail
centering and make prepared holes of
φ
3 to
3.5 mm with a drill.
③
Make about
φ
8-mm through holes for drilling
screws in the finished wall area.
④
Put the drilling screws through the washers and
attach to the wall through the mounting holes
of the flange.
⑤
Press the cover against the finished surface.
Note 1
Note 2
Note 3
①
In the handrail mounting position, fix the
mounting bracket for light-gauge steel frames
to the reinforcing light-gauge steel frames (t 2.3
mm or more) with drilling screws.
②
After finishing the wall, carry out handrail
centering and make
φ
12-mm through holes for
mechanical nuts.
③
Insert the mechanical nuts into the through
holes and set them.
④
Put the bolts through the washers and attach to
the wall through the mounting holes of the
flange.
⑤
Press the cover against the finished surface.
Note 1
Note 3
①
In the handrail mounting position, fix the
mounting bracket for light-gauge steel
frames to the reinforcing light-gauge steel
frames (t 2.3 mm or more) with drilling
screws.
②
After finishing the wall, carry out handrail
centering and make
φ
5.1-mm prepared
holes for M6 tapping.
Make about
φ
8-mm through holes in the
finished wall area.
③
Perform M6 tapping in the mounting bracket
for the light-gauge steel frames.
④
Put the bolts through the washers and
attach to the wall through the mounting
holes of the flange.
⑤
Press the cover against the finished surface.
Note 1
Note 3
(Unit: mm)
(Unit: mm)
(Unit: mm)
Light-gauge steel base: Fixing with drilling screws
Light-gauge steel base: Fixing with mechanical nuts
Light-gauge steel base: Fixing with bolts
7
-6
. Installing the Handrail
*After finishing the wall, you can adjust
the handrail-mounting position within
the range of the mounting bracket.
Note 1: Use reinforcing light-gauge steel frames of t 2.3 mm or more.
Note 2: In order to prevent the handrail from being scratched, make prepared
holes to facilitate installation.
Note 3: Be careful not to overtighten the nuts to avoid tiles from breaking.
