Total TP880-1, Руководство пользователя

Страница: 9 / 34

after it has been turned off
．
These areas get hot and may cause burns
．
3.1.4
NEVER
use accessories or attachments that are not recommended by
us
．
Damage to equipment and injury to the user may result.
3.1.5
NEVER
leave machine running unattended
．
3.1.6
NEVER
tamper with or disable the function of operating controls
．
3.1.7
NEVER
use choke to stop engine
．
3.1.8
NEVER
operate the machine in areas where explosions may occur
．
3.1.9
ALWAYS
read
，
understand
，
and follow procedures in the Operator's Manual
before attempting to operate the equipment
．
3.1.10
ALWAYS
be sure that all other persons are at a safe distance from the
machine. Stop the machine if people step into the working area of the
machine
．
3.1.11
ALWAYS
be sure operator is familiar with proper safety precautions and
operation techniques before using machine
．
3.1.1 2
ALWAYS
wear protective clothing appropriate to the job site when operating
equipment
．
3.1.13
ALWAYS
wear hearing protection when operating equipment
．
3.1.14
ALWAYS
keep hands
，
feet
，
and loose clothing away from moving parts of the
machine
．
3.1.15
ALWAYS
use common sense and caution when operating the machine
．
3.1.16
ALWAYS
be sure the rammer will not tip over
，
roll
，
slide
，
or fall when not
being operated
．
3.1.17
ALWAYS
turn the engine OFF when the rammer is not being operated
．
3.1.18
ALWAYS
guide the rammer in such a way that the operator is not squeezed
between the rammer and solid objects
．
Special care is required when working
on uneven ground or when compacting coarse material
．
Make sure to stand
firmly when operating the machine under such conditions
．
3.1.19
ALWAYS
Operate the rammer in such a way that there is no danger of it
turning over or falling in, when working near the edges of breaks, pits, Slopes.
trenches and platforms
．
3.1.20
ALWAYS
store the equipment properly when it is not being used.Equipment
should be stored in a clean
，
dry location out of the reach of children
．
8