Total TP880-1, Руководство пользователя

Страница: 3 / 34

1
．
FOREWORD
This manual provides information and procedures to safely operate and maintain this
model
．
For your own safety and protection from injury
，
carefully read
，
understand and
observe the safety instructions described in this manual
．
Keep this manual or a copy of it with the machine
．
If you lose this manual or need an
additional copy
，
please contact our Corporation
．
This machine is built with user safety in
mind
；
however
，
it can present hazards if improperly operated and serviced
．
Follow
operating instructions carefully! If you have questions about operating or servicing this
equipment
，
please contact our Corporation
．
The information contained in this manual was based on machines in production at the
time of publication
．
Our Corporation reserves the right to change any portion of this
information without notice
．
All rights
，
especially copying and distribution rights
，
are reserved
．
2
．
EMISSION CONTROL SYSTEM INFORMATION
Source of Emissions
The combustion process produces carbon monoxide
，
oxides of nitrogen
，
and
hydrocarbons
．
Control of hydrocarbons and oxides of nitrogen is very important
because
，
under certain conditions
．
they react to form photochemical smog when
subjected to sunlight
．
Carbon monoxide does not react in the same way
，
but it is toxic
．
We utilizes lean carburetor settings and other systems to reduce the emissions of
carbon monoxide
，
oxides of nitrogen
，
and hydrocarbons
．
The U.S. and California Clean Air Acts
EPA and California regulations require all manufacturers to furnish written instructions
describing the operation and maintenance of emission control systems
．
The following instructions and procedures must be followed in order to keep the
emissions from the engine within the emissions standards
．
Tampering and Altering
Tampering with or altering the emission control system may increase emissions
beyond the egal limit
．
Among those acts that constitute tampering are
：
● Removal or alteration of any part of the intake
，
fuel
，
or exhaust systems
．
● Altering or defeating the speed-adjusting mechanism to cause the engine to operate
outside its design parameters
．
Problems That May Affect Emissions
2