Total TP880-1, Руководство пользователя

Страница: 24 / 34

6.3.3 Remove the oil fill plug (a) and drain plug (b) to drain oil
．
6.3.4 Install the drain plug (b)
．
6.3.5 Fill the engine crankcase with recommended oil up to the level of the plug opening
(c)
．
Do not thread in the dipstick to check the level
．
See Technical Data for oil quantity
and type
．
6.3.6 Install the oil filler plug (a)
．
Graphic 6
6.4 LUbrication
See Graphic 7
Ramming system
Check oil level
：
6.4.1 Place the rammer so it is resting on its shoe on a level surface
．
6.4.2 Check the oil level through oil sight glass (d)
．
Proper ramming system lubrication is
indicated when approximately 1/2-3/4 of the sight glass is full
．
6.4.3 If the oil is not visible, oil must be filled through the filling oil mouth (f)
，
then see the
technical Data for oil quantity and type through oil sight glass(d)
．
6.4.4 Wrap the filling oil plug with Teflon tape
．
Install the filling oil plug (f)
．
Torque to 9
Nm
．
23