Total TP880-1, Руководство пользователя

Страница: 25 / 34

Graphic 7
Oil change
：
6.4.5 Unscrew the oil drain plug (e) located below the oil sight glass
．
6.4.6 Tip the rammer back until it is resting on its handle and allow oil to drain
．
Note
：
In the interests of environmental protection
，
place a plastic sheet and a container
under the machine to collect any liquid which drains off
．
Dispose of this liquid in
accordance with environmental protection legislation
．
6.4.7 Screw in the oil drain plug (e)
．
Torque to 54 Nm
．
6.4.8 Remove filling oil plug (f) and fill with oil
．
See Technical Data for oil quantity and type.
Wrap the filling oil plug with Teflon tape
．
Install the filling oil plug (f)
．
Torque to 9 Nm
．
6.5 Shoe Hardware
See Graphic 8
On new machines, or after replacing shoe
，
check and tighten shoe hardware (a) after the first
5 hours of operation
．
Inspect hardware every week thereafter
．
Torque hardware as specified
．
24