Expected
Expected VDO value
Measured
Actual VDO value
8.4.7 Lightning Plug
This test report is only available to unit that have been licensed for MFi members. This
report will indicate what type of Lightning connector was found in the cable under test.
8.4.8 Over Voltage Protection
This test report is only available to unit that have been licensed for MFi members. This
test the cables over voltage protection. The report table provides the following
information:
Figure 33
: Web Application - Individual Test Report - Over
Voltage Protection Section
Table 13
: Over Voltage Protection Test Report
Status
Pass/fail status of the test.
Subtype
The scenario being tested, this is speci
fi
c to the speci
fi
cation of the cable.
Sources
Pins on the source side of the measurement
Sinks
Pins on the sink side of the measurement
Voltage Ramp
Starting and ending voltage testing range
Cuto
ff
Range
Expected range for the cuto
ff
8.4.9 Quiescent Current
This test is applicable to USB Type-C cables with an E-Marker and Apple MFI Lightning
cables. The MFI Lightning test report is only available to unit that have been licensed for
MFi members. This tests the current draw of the cable under di
ff
erent scenarios. The
report table provides the following information:
Advanced Cable Tester v2 User Manual v2.0.0
48