Status
Pass/fail status of the test
Wire
Name of the wire/signal
Plug 1
The pins on Plug 1 that are actually to be associated with this wire/signal.
Expected Plug 1
The pins on Plug 1 that are expected to be associated with this wire/signal.
Plug 2
The pins on Plug 2 that are actually to be associated with this wire/signal.
Expected Plug 2
The pins on Plug 2 that are expected to be associated with this wire/signal.
In the case of
Shorts
, more pins will appear than expected in either Plug 1 or Plug 2
columns. This short will appears across all rows that are shorted together.
In the case of
Opens
, fewer pins will appear than expected in either Plug 1 or Plug 2
columns. Opens will manifest in additional rows because non-continuous pins are treated
as separate rows in the test report.
8.4.4 DC Resistance Tests
DC Resistance (DCR) tests checks the resistance of the individual pin or wire. In the
case of pin DCR, the source will be a single pin and the sinks will be all other bused pins.
In the case of wire DCR, the source will be all pins from one plug bused to all the pins on
the other plug. The report table provides the following information:
Figure 30
: Web Application - Individual Test Report - DC
Resistance Section
Advanced Cable Tester v2 User Manual v2.0.0
44
