Figure 34
: Web Application - Individual Test Report -
Quiescent Current Section
Table 14
: Quiescent Current Test Report
Status
Pass/fail status of the test. If there is no pass/fail indicator, the test
report is informational only and was not used in determining if the
cable passed or failed.
Label
The scenario being tested, this is speci
fi
c to the speci
fi
cation of the
cable.
Sources
Pins on the source side of the measurement
Sinks
Pins on the sink side of the measurement
Expected Min (A)
Minimum acceptable current
Expected Max (A)
Maximum acceptable current
Measured (A)
Actual measured current
Voltage (V)
Voltage level of the test
8.4.10 Source Measurement Unit
This test report is only available to unit that have been licensed for MFi members. This
tests the current limit of the cable in di
ff
erent scenarios with a source measurement unit
(SMU). The report table provides the following information:
Advanced Cable Tester v2 User Manual v2.0.0
49
