Figure 35
: Web Application - Individual Test Report -
Source Measurement Unit Section
Table 13
: Source Measurement Unit Test Report
Status
Pass/fail status of the test.
Group
High-level grouping of measurements, e.g. Current Limit Test
Label
The scenario being tested, this is speci
fi
c to the speci
fi
cation of the cable.
Expected Min (A)
Minimum acceptable current
Expected Max (A)
Maximum acceptable current
Measured (A)
Actual measured current
8.4.11 Equipment
The equipment section displays information about the ACT v2 tester at the time of the
test for traceability.
8.5 Pro
fi
les
Tests performed on cables are de
fi
ned by test pro
fi
les. By default, the ACT v2 ships with
standard test pro
fi
les that conform to the expected cable standards. These standard test
pro
fi
les are not editable so that the user has a pre-de
fi
ned set of tests for each particular
cable variant. While users cannot modify the standard set of test pro
fi
les, test pro
fi
les
can be copied and customized to suit each customers speci
fi
c needs. Details associated
with a test pro
fi
le can be viewed by clicking on the test pro
fi
le.
Advanced Cable Tester v2 User Manual v2.0.0
50
