background image

1

IMPO

RTAN

T:

IMPO

RTAN

T:

Go to 

www.

extron.com f

or the complete 

user 

guide

, installation in

structions,

 and 

specifications 

before con

necting the 

product to th

e power 

source

.

Cable Cubby 1202 and 1402 • Installation Guide

This guide provides instructions for an experienced technician to install and connect the 
Extron Cable Cubby 1202 and 1402.

T

he Cable Cubby units are furniture-mounted enclosures for cable access, 

connections, and AC power. Cables that are not in use can be stored out of the 
way while remaining connected to the presentation system.

NOTE:

  This product is intended for use only with Extron UL listed 

power modules (not included).

Planning

Check with local and state regulations before starting the installation

 

…

Ensure that the planned installation complies with national and local building and electrical codes.

 

…

Ensure that the planned installation complies with the Americans with Disabilities Act or other accessibility requirements.

Check all parts and equipment before installation

 

…

Ensure that all parts are present in each kit.

 

…

Ensure that necessary tools and equipment are available for the installation.

Kit Contents

1

2

4

8

1

2

1

2

6 (3/8

"

), 2 (1/4

"

)

12 (3/8

"

), 4 (1/4

"

)

1

2

1

2

8

16

Cable Cubby 1202

Cable Cubby 1402

#4-40 Module Screws

#6 Pan-head Mounting 

Screws and Star Washers

AAP Frame Plate

Cable Grommet Plate

Hole Plugs

Retractor Pin & Clip

Connectivity 

Bracket

#4-40 Module Screws

AAP Frame Plate

Cable Grommet 

Plate

Hole Plugs

Retractor 

Bracket

Retractor 

Pin & Clip

#6-32 Mounting 

Screws and Star 

Washers

Содержание Cable Cubby 1202









Отзывы: