English
into the body of the spray gun. Correctly position the
nozzle so that it engages with the notches on the
spray gun (Figure 9B).
Insert the nozzle into the body of the spray gun and
turn it to the correct position. Fit the air cap onto the
nozzle and tighten it with the nozzle adjuster ring.
Finally, insert the tank seal under the fluid hose and
slide up to the join. To do this, twist the tank seal
slightly and insert the fluid hose with the tank seal
into the body of the spray gun.
SET INCLUDES:
- Main device
-Hose
-Carry strap
-Viscosity cup
-Spray gun
-Paint tank
-Cleaning pin
TECHNICAL SPECIFICATIONS
VOLTAGE: 220-240 V; 50 Hz
MAXIMUM INPUT POWER: 900 W
FLOW: 800 mL/min (spray water)
TANK CAPACITY: 800 ml
LENGTH OF HOSE: 1.5 m
MAXIMUM VISCOSITY: 45 DIN/sec
MOTOR SPEED: 36,000 rpm
WEIGHT: 1.9 kg
Noise data: LpA=82.1dB(A) ; LwA=93.1dB(A) K=3
Vibration data: 2,180m/s2 K=1.5
Quality Warranty
This product is covered by a warranty against manu-
facturing defects subject to the time periods stipula-
ted by the legislation in force in each country.
This warranty does not cover damages resulting
from inadequate use, negligent commercial use,
abnormal wear and tear, accidents or improper
handling.
Australia & New Zealand only
This product has the benefit of certain Consumer
Guarantees. These are prescribed by the Australian
Consumer Law & the New Zealand Consumer Gua-
rantees Act 1993 both of which provide protection
for consumers. There is no express warranty for this
product in Australia or New Zealand. The above pa-
ragraph refers to other countries.
ATTENTION
Disposal of materials
A symbol of a crossed-out wheeled bin means you
should find out about and follow local regula-
tions about disposing of this kind of product.
Do not dispose of this product as you would
other household waste.
Dispose of this device in accordance with the corres-
ponding local regulations.
Electrical and electronic devices contain hazardous
substances that can have harmful effects on the
environment and/or human health and should be
recycled properly.
This appliance is double insulated; therefore,
no earth wire is required. Always check that the
mains voltage corresponds to the voltage on
the product rating plate.
WARNING - To reduce the risk of injury,
user must read instruction manual.
Declaration of Conformity
We declare under our sole responsibility that this
VBRVACIND0001
900W ELECTRIC SPRAY GUN is in conformity with
the following standard or standardized documents.
EC directives 2006/42/EC
Low voltage Directive 2006/95/EC (until April 19th,
2016)
2014/35/EU (from April 20th, 2016)
Electromagnetic Compatibility Directive 2014/30/EU
EC RoHS directive 2011/65/EU
and conforms with the norms
EN 60745-1/A11:2010
EN 50580/A1:2013
EN 55014-1/A2:2011
EN 55014-2/A2:2008
EN 61000-3-2/A2:2009
EN 61000-3-3:2013
IEC 62321:2008
INDUSTEX S.L
ADD:AV. P.CATALANES 34 8A PLANTA 08950 ES-
PLUGAS DE LLOBREGAT (BARCELONA) SPAIN
Made in China
11
