manualshive.com logo in svg

Toshiba Tecra S4, Руководство пользователя


Поделиться
Скачать
background image

1-8

User’s Manual

Introduction

Slots

Multimedia

Communications 

PC Card

The internal PC Card slot accommodates a 
single Type II (5mm) card.

ExpressCard

The internal ExpressCard slot accommodates a 
single ExpressCard.

SD Card

This slot allows you to easily transfer data from 
devices such as digital cameras and Personal 
Digital Assistants (PDAs) that use SD card flash 
memory.

Refer to Chapter 8, 

Optional Devices

.

Sound system

The integrated sound system provides internal 
speakers and a microphone, as well as allowing 
an external microphone and headphones to be 
connected via the appropriate jacks.

S-Video out port

The S-Video out port allows you to transfer video 
data to external devices using an optional 
S-Video cable. Please note that the data output 
will depend on the type of device that is 
connected.

Headphone jack

A 3.5mm mini headphone jack enables 
connection of stereo headphones.

Microphone jack

A 3.5mm mini microphone jack enables 
connection of a three-conductor microphone for 
monaural input.

Modem

The integrated modem provides capability for 
data and fax communications that support the 
V.90 (V.92) standards and includes a modem 
jack for connection to a telephone line. Please 
note that both the V.90 and V.92 standards are 
only supported in the USA, Canada, UK, France, 
Germany and Australia. Only the V.90 standard 
is supported in other regions. You should also be 
aware that the speed of data and fax transfer will 
depend on analog telephone line conditions.

LAN

The computer has built-in support for Ethernet 
LAN (10 megabits per second, 10BASE-T), Fast 
Ethernet LAN (100 megabits per second, 
100BASE-TX) and Gigabit Ethernet LAN 
(1000 megabits per second, 1000BASE-T).

Содержание Tecra S4















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Tecra S4

Acer Extensa Series Generic User Manual preview
Extensa Series
Бренд: Acer Страницы: 59
Razer BLADE User Manual preview
BLADE
Бренд: Razer Страницы: 36
IBM THINKPAD R50 series Service And Troubleshooting Manual preview
THINKPAD R50 series
Бренд: IBM Страницы: 108
IBM ThinkPad i Series 1400 Supplementary Manual preview
ThinkPad i Series 1400
Бренд: IBM Страницы: 46
IBM ThinkPad 570 User Reference Supplement preview
ThinkPad 570
Бренд: IBM Страницы: 3
IBM ThinkPad 380Z Setup Manual preview
ThinkPad 380Z
Бренд: IBM Страницы: 4
IBM ThinkPad 380XD User Manual preview
ThinkPad 380XD
Бренд: IBM Страницы: 222
IBM ThinkPad 310E Troubleshooting Manual preview
ThinkPad 310E
Бренд: IBM Страницы: 19
IBM ThinkPad 240 Maintenance Manual preview
ThinkPad 240
Бренд: IBM Страницы: 65
IBM ThinkPad 240 Hardware Maintenance Manual preview
ThinkPad 240
Бренд: IBM Страницы: 67
IBM ThinkPad T60 Installationsposter preview
ThinkPad T60
Бренд: IBM Страницы: 2
IBM ThinkPad i Series 1400 User Manual preview
ThinkPad i Series 1400
Бренд: IBM Страницы: 168
IBM ThinkPad X20 Setup Manual preview
ThinkPad X20
Бренд: IBM Страницы: 8
IBM TransNote Hardware Maintenance Manual preview
TransNote
Бренд: IBM Страницы: 150
IBM ThinkPad T20 Owner'S Manual preview
ThinkPad T20
Бренд: IBM Страницы: 72
Fujitsu P3010 - LifeBook - Athlon Neo 1.6 MHz Bios Manual preview
P3010 - LifeBook - Athlon Neo 1.6 MHz
Бренд: Fujitsu Страницы: 13
Fujitsu P8020 - LifeBook - Core 2 Duo 1.4 GHz Specification Sheet preview
P8020 - LifeBook - Core 2 Duo 1.4 GHz
Бренд: Fujitsu Страницы: 2
Fujitsu T2020 - LifeBook Tablet PC (French) Manuel Du Propriétaire preview
T2020 - LifeBook Tablet PC
Бренд: Fujitsu Страницы: 210

Бренды по названию

Популярные бренды

Загрузить еще бренды