Toshiba Stratagy Flash, Руководство по установке

Страница: 45 / 56

Maintenance
Shut Down the Stratagy Flash
Stratagy Flash Installation Guide 02/02
33
3. Enter the new security code (the default is ) and press . All inactive channels are
taken off-hook. All active channels are given a 60 second time delay to complete processing the
current activity. After 60 seconds, they are disconnected and the system shuts down.
Note The Stratagy Flash is completely shut down when the status light is Out and all port LEDs
are On.
➤
To restart the Stratagy Flash system
➤
Unplug the Stratagy Flash’s power cord from the wall, wait a few seconds and then plug it back
in. This automatically restarts the system and puts all channels on-hook and ready to accept
calls.
Stratagy Admin’s Main Menu
➤
To shut down the Stratagy Flash using Stratagy Admin’s main menu
1. From Stratagy Admin’s Main Menu, select Shutdown by pressing Alt + s . Stratagy Flash asks
for the password.
2. Enter the password (the default is
Stratagy
) and press
Enter
. The screen enables you to
select one of the following options:
•
Shutdown and Restart CURRENT Version — Restarts Stratagy Flash (equivalent to
pressing the
Esc
key on the current Stratagy Flash platform).
Note This option must be used any time you make significant programming changes (see
“Automatic System Recovery” on page 34 for details).
•
Shutdown and Trace CURRENT Version — Shuts down, then restarts Stratagy Flash in the
TRACE mode (TRACE.OUT file is created). See
“Trace” on page 34 for details.
•
Shutdown and Start NEW Version — Shuts down, then restarts Stratagy Flash using the
new database and new Stratagy Flash system software, if any.
•
Shutdown and Start OLD Version — Shuts down, then restarts Stratagy Flash using the
software version previous to the upgraded software.
•
Shutdown, SCANDISK, and Restart — Shuts down, runs ScanDisk program and then
restarts Stratagy Flash. See
“ScanDisk” on page 36 for details.
Note
There is no screen interaction during the running of the ScanDisk Utility.
•
Shutdown and STOP for power off — Takes Stratagy Flash off-line and does not restart it.
Note
This option is not available when accessing Stratagy Flash remotely.
3. From the Shutdown Menu, highlight your selection and press
Enter
.
4. If you chose the “Shutdown and STOP for power off” option, Stratagy Flash asks you to
confirm the shutdown. Type
Y
to confirm. The DOS prompt (
C:\VSA3
) displays.