Toshiba Stratagy Flash, Руководство по установке

Страница: 24 / 56

Installation
Step 9: Configure Stratagy Admin Software
12
Stratagy Flash Installation Guide 02/02
Stratagy Flash Modem
The Stratagy Flash can communicate through a customer-supplied external modem. An external
modem can be installed on the Stratagy Flash for a communication speed of 9600 baud.
➤
To install an external modem
1. Equip the Stratagy Flash with a Hayes-compatible 14.4kb V32.bis modem.
Toshiba’s fax/modem (SG-FMOD) has been tested for consistent operation and is
recommended. Use of other modem models cannot be guaranteed for trouble-free operation.
Note The default setting configured for the Stratagy Flash remote access is serial port 2. Both
local and remote access use the same designated serial port on the Stratagy Flash.
2. Connect a telephone line to the modem. Use either a station connected to the telephone system
or a dedicated Central Office (CO) line.
Step 9: Configure Stratagy Admin Software
Settings for the communication port in Stratagy Admin must match the corresponding parameters
set in the Stratagy System Configuration file on the Stratagy Flash.
For example, the Stratagy Admin PC serial port settings made in the Serial Port field of this
procedure must be identical to the serial port definitions (i.e., set serial_port) set in the
Stratagy Flash’s Stratagy System Configuration file (see
“Stratagy System Configuration” on page
18 ).
Note The menu screens detailed in this section are only available with Stratagy Admin version
VSA.2G or later; however, only VSA.3x can be used with the Stratagy Flash.
➤
To configure Stratagy Admin software
1. From the
C:\VSA3
DOS prompt, type
admin
and press
Enter
. The Stratagy Admin screen
displays.
2. From the Stratagy Admin
Main screen, press
2
or
highlight the Configure
Admin option and press
Enter
. The Admin PC
Configuration screen
displays (shown right).
Note
Press
F1
for help with
any settings in the
Stratagy Admin Configuration screen.
3. Make any changes needed. See Table 1 on page 13 for a description of each of the fields.
Note
Press
F2
in the Serial Port and Baud Rate fields to display a pop-up box with valid entries.
4. To save your changes, you must have the cursor in the last field (i.e., Modem Init String), and
press
Enter
or the arrow down (
↓
) key
...or to exit without saving your changes, press
Esc
at any time.
The program returns to the Stratagy Admin Main screen.
3230