Toshiba Stratagy Flash, Руководство по установке

Страница: 38 / 56

Maintenance
Tools
26
Stratagy Flash Installation Guide 02/02
Notes
•
You cannot back up files to the Stratagy Admin PC’s floppy disk drive.
•
Be sure to enter the complete path, including the drive letter.
4. (Optional) If you entered selection 2 “Backup Names & Greetings” in Step 2 , you are asked to
enter a beginning and ending mailbox number. Type the mailbox numbers and press
Enter
after each entry.
Note Leaving both fields blank defines all mailboxes.
...or if you entered selection 3 “Backup Database, Names & Greetings” in Step 2 , press
Enter
in the mailbox fields to leave them blank.
Important! This selection backs up the entire database and all names and greetings. You cannot
backup selective mailboxes.
Before the backup starts, Stratagy
Admin calculates the time the backup
takes and displays a status message
(sample shown at right).
5. Verify that the Stratagy Admin PC has enough available disk space to accommodate the backup
file.
Based on the Stratagy Flash’s estimated Backup time (shown on your screen), use the
calculations shown below to estimate the required hard drive space.
Transmitting at: Bytes Per Second (bps) written to
hard drive:
9600 bps 800 bytes
4800 bps 400 bytes
2400 bps 200 bytes
Example: If Stratagy Admin displays a five minute backup time and communication is at 9600
bps, then:
5 minutes = 300 seconds
300 seconds x 800 bytes = 240,000 bytes
BPS values are not exact. Additional amounts have been factored in to estimate a higher
quantity of space than is actually required.
6. If your Stratagy Admin PC’s
hard drive has enough
available disk space, press
Y
to backup the files
...or if not, press N to cancel
the backup procedure.
7. Press
Y
to continue.
CAUTION!
If Stratagy Flash is not rebooted, all ports remain in an off-hook condition.
8. When the backup is complete, press
Y
to reboot Stratagy Flash. The Stratagy Admin PC returns
to the
C:\VSA3
DOS prompt.
3235
3236