Toshiba SATELLITE L310, Руководство пользователя

Страница: 114 / 224

4-28 User’s Manual
Operating Basics
■
When you back up a DVD disc, be sure that the source drive supports
recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer) or DVD+RW media - if this is not the case then the
source disc might not be backed up correctly.
■
When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R,
DVD+R (Double Layer), DVD+RW, HD DVD-R, HD DVD-R (Dual
Layer) or HD DVD-RW disc, be sure to use the same type of disc.
■
You cannot partially delete any data written to a CD-RW, DVD-RW,
DVD+RW, HD DVD-RW disc.
Data Verification
To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD/HD DVD.
1. Display the setting dialog box by one of the following two steps:
■
Click the setting button ( ) for writing on the main toolbar in the
Data Disc mode.
■
In the Settings menu, select Settings for Each Mode , then Data
Disc .
2. Mark the Verify Written Data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.
When Using Ulead DVD MovieFactory for TOSHIBA
How to make a Labelflash DVD
Simplified steps for making a Labelflash DVD:
1. Insert a Labelflash disc in DVD drive.
2. Click Æ All Programs Æ DVD MovieFactory for TOSHIBA Æ
Ulead DVD MoiveFactory for TOSHIBA Laucher to launch DVD
Moive Factory.
3. Click Print Dise Label Æ Label Printing . Ulead Label@Once is started.
4. Click the General tab.
5. Choose DVD Drive for Printer. e.g. < E: > PIONEER DVD…
6. Add and customize the look of your images and text.
7. Click
Labelflash setting and choose Draw Quality .
8. Click Print .
Set PRINTING SIDE surface for underside.