Toshiba RAV-SP1100AT-E, Руководство по обслуживанию

Страница: 48 / 118

48
RAV-SP1100AT-E, RAV-SP1400AT-E
<SW800: LED display in bit 1, bit 2, bit 3 OFF>
• When multiple errors are detected, the latest error is displayed.
• When LED display is
○
(Go on), there is the main cause of trouble on the objective part of control at CDB
side and the unit stops.
• When LED display is ◎ (Flash), there is the main cause of trouble on the objective part of control at IPDU
side and the unit stops.
• When case thermostat operates, the communication is interrupted on the serial circuit. If continuing the case
thermostat operation, a serial communication error occurs because serial sending to the indoor unit is inter-
rupted.
CDB side
IPDU side
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Item
TE sensor error
TD sensor error
TS sensor error
TO sensor error
Discharge temp. error
DC outdoor fan error
Communication error
between IPDU
(Abnormal stop)
High-pressure release
operation
EEPROM error
Communication error
between IPDU
(No abnormal stop)
G-Tr short-circuit
protection
Detection circuit error
Current sensor error
Phase missing detection
Comp. lock error
Comp. breakdown
Check code
Type A Type B
F06 18
F04 19
F06 18
F08 1B
P03 1E
P22 1A
L29 1C
P04
21
—
— —
— —
P26 14
P29 16
H03 17
H03 17
H02 1D
H01 1F
LED display
D800 D801 D802 D803
(Red) (Yellow) (Yellow) (Yellow)
○ ● ● ●
○ ○ ● ●
● ● ○ ●
● ○ ● ●
● ○ ○ ●
○ ○ ○ ●
○ ● ● ○
● ○ ● ○
○ ○ ● ○
● ● ○ ○
◎ ● ● ●
● ◎ ● ●
◎ ◎ ● ●
● ● ● ◎
● ● ◎ ●
◎ ● ◎ ●
○ : Go on ● : Go off ◎ : Flash (5Hz)
<<Check code>>
The check codes are classified into Type A according to the used remote controller.
Be sure to check the remote controller which you use.
Type A :
Neutral 2-cores type wired remote controller such as RBC-AMT21E and RBC-AS21E.