manualshive.com logo in svg

Toshiba QOSMIO G20 Series, Руководство по обслуживанию

Поделиться
Скачать
Toshiba QOSMIO G20 Series Скачать руководство пользователя страница 441

Appendix J Maintenance of TOSHIBA RAID 

J.3Operation of Independent utility

 

 

Execute the following procedures to see the drive log in the independent utility. 

1.  Put on the cursor on [Physical Drive] in [Main Menu] and press 

[Enter]

 key. 

2.  Put on the cursor on [View Drive Log] and press 

[Enter]

 key. 

3.  Select drive that you want to display the log in [Physical Drive] at the lower of 

display with a cursor key and press 

[Enter]

 key.  

4.

 

The drive log is displayed. Press 

[PageUp] 

or 

[PageDown]

 key to scroll the 

drive log upward or downward. 

5.  To change log displayed, put the cursor on [Change Port] and press 

[Enter]

 key.  

6.  Select Drive log port to be displayed and [Own/Redundant]. For Example, [Own] 

log means the drive log of Port-0 own, [Redundant] log of Port-0 means the 
backup copy of the drive log of Port-1. 

7.  To switch the upper and lower of drive log frame, press 

[Tab]

 key. The selected 

frame is displayed more lightly than the other frame. 

8.

 

To move to the drive log wit arbitrary log number, put the cursor on the [Go to 

Event] and press 

[Enter]

 key. Next, input the log number you want to move to 

and press 

[Enter]

 key. 

The 7,168 logs from the latest is recorded in detail. For the older than that, only 
identification ID is recorded. 

 

 

QOSMIO G20 Maintenance Manual (960-511)                        [CONFIDENTIAL]

 

J-25 

Содержание QOSMIO G20 Series





























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды