manualshive.com logo in svg

Toshiba QOSMIO G20 Series, Руководство по обслуживанию

Поделиться
Скачать
Toshiba QOSMIO G20 Series Скачать руководство пользователя страница 228

3.32 SETUP 

3 Tests and Diagnostics

 

5.

 

Boot Priority 

(a)

 

Boot Priority  

Use this option to set the priority for booting of the computer and the priority 
for the HDD for booting. 

FDD

→

HDD

→

CD-ROM

→

LAN:

  The computer looks for bootable files in 

the following order: FDD, HDD, CD-
ROM (*1) and LAN  

HDD

→

CD-ROM

→

LAN

→

FDD: 

The computer looks for bootable files in 
the following order: HDD, CD-ROM, 
LAN and FDD.

 

FDD

→

CD-ROM

→

LAN

→

HDD:

  The computer looks for bootable files in 

the following order: FDD, CD-ROM, 
LAN and HDD. 

CD-ROM

→

LAN

→

HDD

→

FDD:

  The computer looks for bootable files in 

the following order: CD-ROM, LAN, 
HDD and FDD. 

CD-ROM

→

LAN

→

FDD

→

HDD: 

The computer looks for bootable files in 
the following order: CD-ROM, LAN, 
FDD and HDD.

 

HDD

→

FDD

→

CD-ROM

→

LAN: 

The computer looks for bootable files in 
the following order: HDD, FDD, CD-
ROM and LAN. (Default) 

(*1) CD-ROM refers to a Optical Disk Drive. 

(b)

 

HDD Priority 

Use this option to set the booting priority from HDD. 

Built in HDD1

→

Built in HDD2

 (Default)

 

 

 

 

 

:

 detecting boot-command from Built in HDD1 

Built in HDD2

→

Built in HDD1 

 

 

 

 

:

 detecting boot-command from Built in HDD2 

NOTE:

 When 2nd HDD is not installed, this option does not appear in the menu. 

 

 

If the boot command can not be detected from the prior HDD, booting 
target changes to other devices. (Not detected from the other one) 

(c)

 

Network Boot Protocol 

Use this option to set the starting method via a network. 

PXE

  Sets to PXE protocol. (Default)   

 

RPL 

Sets to RPL protocol. 

3-110                         [CONFIDENTIAL] 

 

QOSMIO G20 Maintenance Manual (960-511) 

Содержание QOSMIO G20 Series





























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды