manualshive.com logo in svg

Toshiba QOSMIO G20 Series, Руководство по обслуживанию

Поделиться
Скачать
Toshiba QOSMIO G20 Series Скачать руководство пользователя страница 196

3.29  Wireless LAN Test Program (Askey-made) 

3  Tests and Diagnostics

 

 

3.29  Wireless LAN Test Program (Askey-made) 

This section describes how to perform the wireless LAN transmitting-receiving test (Askey-
made Atheros b/g, a/b/g).  

Caution:

  To execute subtest 03-07, use another computer (with Atheros wireless LAN 

card) that can communicate by the wireless LAN as a responder machine to 
perform those tests.  

   

 

Another

 

wireless communication tool with 2.4GHz like Bluetooth is interfering 

with the test. Execute this test in the condition where no interference around the 
computer. 

   

 

Be sure to turn the wireless communication switch ON before executing 
wireless LAN communication test. (The wireless communication LED lights 
orange.)  

   

 

Release the write-protection of floppy disk for the test. 

Setting the responder machine 

To execute subtest 03-07, responder machine with wireless LAN communication function 
(Atheros-made) is required. To set the responder machine, follow the procedures below. 

1.

 

Insert the test program disk to the FDD of responder machine and turn on the power. 

2.

 

Start the program for responder machine automatically. 

3.

 

The program for responder machine is set. 

Setting the tester (DUT) machine 

1.

 

Insert the test program disk 1 to the FDD of tester machine and turn on the power. 

2.

 

The program disk 1 is executed and following message will appear in the display. 

************************************************************* 

*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* 

* 

 

 Atheros MB4x Maintenance T&D (DUT)   

 

 

* 

*  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* 

* 

 

 Please exchange for DUT media 2   

 

 

 

* 

************************************************************* 

Please input the “S” key and push the “Enter” key:

 

3.

 

Take out the program disk 1 and insert program disk 2. Then, press 

S

 and 

Enter

. 

4.

 

Executing program disk 2, following menu will appear in the display. To execute the 
subtest, press test number and 

Enter

. 

3-78                     [CONFIDENTIAL] 

 

QOSMIO G20 Maintenance Manual (960-511) 

Содержание QOSMIO G20 Series





























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды