manualshive.com logo in svg

Toshiba QOSMIO G20 Series, Руководство по обслуживанию

Поделиться
Скачать
Toshiba QOSMIO G20 Series Скачать руководство пользователя страница 437

Appendix J Maintenance of TOSHIBA RAID 

J.3Operation of Independent utility

 

Change RAID Level 

To change RAID level, select [Modify Array] menu. When changing RAID-1 
(Mirroring) to RAID-0 (Striping), refer “Changing RAID-1 to RAID-0”. When 
changing RAID-0 to RAID-1, refer “Changing RAID-0 to RAID-1”. 

Changing RAID-1 to RAID-0 working by one drive 

When changing RAID-1 array working by two drives to RAID-0 working by one drive, 
follow the procedure below. 

1.  Select [Modify Array] in [Main Menu]. 

2.  In [Modify Array], select array [LDx] that you want to change. 

3.  In [Modify Array], select [RAID-1 -> RAID-0]. 

4.  In [Physical Drive] select one drive, which is used as RAID-0, and press 

[Space]

 

key

 

 

5.  After selecting a drive, press 

[Enter]

 

key. When [Confirmation] is displayed, 

select “OK” to store the setting. 

Changing RAID-0 working by one drive to RAID-1 

To change RAID-1 working by one drive to RAID-1 working by two drives, follow the 
procedure below. 

1.  Select [Modify Array] in [Main Menu]. 

2.  In [Modify Array], select array [LDx] that you want to change. 

3.  In [Modify Array], select [RAID-0 -> RAID-1]. 

4.

 

Select a drive in the condition of [OFFLINE] in [Physical Drive], which is 

expanded as RAID-1 with 

[Space] 

key. After selecting drive, [Status] changes to 

[REBUILDING]. The capacity of drive that is newly added must be same/more 
as/than original drive. The drive in the condition of [Fail] can not be incorporated.  

5.

 

After selecting a drive, press 

[Enter]

 

key. When [Confirmation] is displayed, 

select “OK” to store the setting. 

6.

 

Select [Resume Rebuild] in [Main Menu], or select [Exit] to exit from Independent 

Utility. When automatic rebuilding is set in OS, rebuilding starts automatically 
after booting OS.  

7.

 

During rebuilding, the progress is displayed in [Physical Drive]. Suspending or 

aborting is possible. 

8.

 

When the rebuilding is completed, message is displayed, the select “OK”. 

QOSMIO G20 Maintenance Manual (960-511)                        [CONFIDENTIAL]

 

J-21 

Содержание QOSMIO G20 Series





























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды