Toshiba nv-pack, Руководство пользователя

Страница: 20 / 76

Chapter 1 General Specifications
6F8C1859
4
1.4 Disk Configuration
This section describes the disk configuration for supporting the virtualization function.
A total of 2 disks are required for one for PLC and one for Windows.
In the typeFR with Windows license, the Drive Bay 0 and the Drive Bay 1 on the
main unit are configured as follows.
Table1.3 Disk Configuration
Unit model SSD model Size Use
Drive Bay 0
UMSD2* THNSN*128* 128GB PLC
Drive Bay 1
UMSD3* THNSN*512* 512GB Windows
1.5 Network Configuration
This section describes the network configuration of typeFR with virtualization function.
Physical port LAN 20 and LAN 21 are shared by PLC and Windows. Set PLC’s and
Windows’ IP addresses to be assigned to the same physical port to different host
addresses within the same network address.
In case of TC-net VM is included in nV-Tool station configuration, physical port LAN 21 is
only shared by PLC and Windows.
Table1.4 An example of Network Configuration
IP address
(PLC) MAC address
(PLC) IP address
(Windows) MAC address
(Windows)
LAN20 192.168.0.1 B8-6B-23-70-1B-E7 192.168.0.2 BA-6B-23-70-1B-E7
LAN21 172.16.64.1. B8-6B-23-71-1B-E7 172.16.64.2. BA-6B-23-71-1B-E7
Note
The G / L bit (normally 0) of the first half part (OUI) of the MAC address of the network card
is set to 1 on Windows. That is, the G / L bit in PLC and Windows is as follows.
0: PLC
1: Windows