ELECTRICAL ADJUSTMENTS
2-14: CONTRAST MAX
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Receive the monoscope pattern. (RF Input)
Using the remote control, set the brightness and contrast
to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (33) on the remote control to
select "CONT MAX".
Press the LEFT/RIGHT button on the remote control until
the contrast step numbers becomes "121".
Receive a broadcast and check if the picture is normal.
Receive the digital broadcast. (RF Input)
Perform the above adjustments 2~5.
Receive the monoscope pattern. (VIDEO Input)
Press the INPUT button on the remote control to set to
the AV mode.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (33) on the remote control to
select "CONT MAX".
Press the LEFT/RIGHT button on the remote control until
the contrast step numbers become "121".
Receive a broadcast and check if the picture is normal.
Playback the DVD(480i) disc. (COMPONENT Input)
Press the INPUT button on the remote control to set to
the YUV mode.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (33) on the remote control to
select "CONT MAX".
Press the LEFT/RIGHT button on the remote control to
until the contrast step numbers as the AV mode.
Playback the DVD(480i) disc.
Press the DVD button on the remote control to set to the
DVD mode.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (33) on the remote control to
select "CONT MAX".
Press the LEFT/RIGHT button on the remote control to
decrease the step numbers by 10 step to the AV mode.
2-13: BRIGHT CENTER
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Receive the monoscope pattern. (RF Input)
Using the remote control, set the brightness and contrast
to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (29) on the remote control to
select "BRI CENT".
Press the LEFT/RIGHT button on the remote control
until the white 10% is starting to be visible
Receive the monoscope pattern. (VIDEO Input)
Press the INPUT button on the remote control to set to
the AV mode. Then perform the above adjustments 2~4.
Playback the DVD(480i) disc.(COMPONENT Input)
Press the INPUT button on the remote control to the
YUV mode. Then perform the above adjustments 2~4.
Receive a broadcast and check if the picture is normal.
Receive the digital broadcast. (RF Input)
Press the INPUT button on the remote control to set to
the DIGITAL mode.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (29) on the remote control to
select "BRI CENT".
Press the LEFT/RIGHT button on the remote control to
decrease the step numbers by 5 step to the AV mode.
Playback the DVD(480i) disc.
Press the DVD button on the remote control to set to the
DVD mode.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (29) on the remote control to
select "BRI CENT".
Press the LEFT/RIGHT button on the remote control to
set the same step numbers as the AV mode.
D3-4
2-15: HORIZONTAL SIZE
1.
2.
3.
4.
Receive the monoscope pattern.
Using the remote control, set the brightness and contrast
to max position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (43) on the remote control to
select "H.SIZE".
Press the LEFT/RIGHT button on the remote control
until the SHIFT quantity of the OVER SCAN on right
and left becomes 10±4%.
