SERVICE MODE LIST
This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control
for more than the standard time in the appropriate condition. (See below chart.)
Releasing of V-CHIP PASSWORD.
Initialization of factory data.
NOTE: Do not use this for data normal servicing.
If you set factory initialization, the memories are reset such
as the clock setting, the channel setting, the POWER ON
total hours, and PLAY/REC total hours.
Set Key
Operations
VOL. (-) MIN
Remocon
Key
0
2 sec.
1
2 sec.
Standard
Time
8
2 sec.
3
2 sec.
2
2 sec.
4
2 sec.
Set
Condition
TV mode
VCR mode
(Playback)
TV mode
9
2 sec.
VOL. (-) MIN
VOL. (-) MIN
VOL. (-) MIN
VOL. (-) MIN
TV mode
VCR mode
(Playback)
VOL. (-) MIN
VCR mode
(Playback)
VOL. (-) MIN
TV mode
ALL mode
VOL. (-) MIN
ALL mode
VOL. (-) MIN
REC/OTR
DVD mode
(No disc)
STOP(DVD)
DVD mode
(No disc)
Adjust the PG SHIFTER automatically.
Refer to the "ELECTRICAL ADJUSTMENT" (PG SHIFTER).
Horizontal position adjustment of OSD.
NOTE: Also can be adjusted by using the Adjustment MENU.
Refer to the "ELECTRICAL ADJUSTMENT" (OSD HORIZONTAL).
Adjust the PG SHIFTER manually.
Refer to the "ELECTRICAL ADJUSTMENT" (PG SHIFTER).
5
2 sec.
Adjusting of the Tracking to the center position.
6
2 sec.
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
Check of the SUM DATA, POWER ON total hours, MICON VERSION
VERSION and DIGITAL TV MICON FIRMWARE on the screen.
Refer to the "WHEN REPLACING EEPROM(MEMORY) IC".
Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
Adjustment).
DVD Write mode.
Refer to the “RE-WRITE FOR DVD FIRMWARE”.
NOTE: Do not use this for normal servicing.
0
2 sec.
Check for the firmware version.
Refer to the “RE-WRITE FOR DVD FIRMWARE”.
NOTE: Do not use this for normal servicing.
1
3 sec.
REC/OTR
DVD mode
(No disc)
STOP(DVD)
DVD mode
(No disc)
Initialization of factory on DVD data.
NOTE: Do not use this for normal servicing.
4
2 sec.
Releasing of PARENTAL LOCK.
Refer to the “PARENTAL CONTROL - RATING LEVEL”.
7
2 sec.
Set Key
Operations
Set Key
Standard
Time
Set
Condition
ALL mode
FF
2 sec.
The BOT, EOT and the Reel Sensor do not work and the VCR deck
can be operated without a cassette tape.
Refer to the "PREPARATION FOR SERVING".
VOL. (-) MIN
C2-1
Operations
The disk cannot be taken out.
Refer to the ”TRAY LOCK”.
Method
Press the following remocon keys
continuously.
SETUP SUBTITLE 3
AUDIO SELECT 0
