6F8A0917
- 3 -
SAFETY PRECAUTIONS
(continued)
Safety Precautions for Installation and Wiring
Do not use the LF232 in an
explosive
atmosphere
.
Use an
appropriate device
to carry and install
the LF232.
DON’T
Using this product in an explosive
atmosphere can cause
explosion
.
DO
If this product
falls to the ground
,
injury, or malfunction of or damage
to the product, can be caused.
Install a switch and fuse
to isolate the LF232
from mains power.
Do not modify or disassemble
the LF232
unnecessarily.
DO
Power supply from mains power can
cause
electric shock or circuit
break-down
.
DON’T
Modifying or disassembling this
product can cause
electric shock,
malfunction of or damage to this
product
.
Turn off mains power
before conducting wiring
work.
Ground
the LF232
independently from power
equipment
.
Type D (100 ohm or less ground
resistance)
DO
Wiring while power is applied can
cause
electric shock
.
DO
Operating this product without
grounding can cause
electric shock
or
malfunction
.
Turn off mains power
before working on pipes.
Use
crimped terminal lugs
for the terminal board
and GND terminal.
DO
Working on pipes while power is
applied can cause
electric shock
.
DO
Loose connections can cause
electric
shock, fire from excessive current or
system malfunction
.
Do not conduct wiring work
with bare hands
.
Do not work on piping and wiring
with wet
hands
.
DON’T
Remaining electric charge
even if
power is turned off can still cause
electric shock
.
DON’T
Wet hands may result in
electric
shock
.
The label shown left is placed near the terminal board for power supply on the
converter.
Be alert to
electric shock
.
