Toshiba e-Studio477s Скачать руководство пользователя страница 91

Страница: 91 / 264

USEFUL FUNCTIONS

- 91 -

Selecting original mode

Select the original mode for the image quality best suited to
your originals.

Note

• The Original Mode setting is not available when [GRAY

SCALE] is selected for the color mode setting.

[TEXT]

— Select this option to scan text originals.

[TEXT/PHOTO]

— Select this option to scan originals

containing text and photos. This option is available only when
[BLACK] is selected for the color mode setting.

[PHOTO]

— Select this option to scan originals containing

photos printed on photographic paper.

[PRINTED IMAGE]

— Select this option to scan originals as

printed images. This option is available only when [FULL
COLOR] or [AUTO COLOR] is selected for the color mode
setting.

Changing orientation

With the rotation setting, you can change the orientation of
your scans. If necessary, select the desired rotation pattern
from the following options:

— Select this option to rotate your scans 90 degrees to

the right.

— Select this option to scan originals without a change

in orientation.

— Select this option to rotate your scans 90 degrees to

the left.

— Select this option to rotate your scans 180 degrees.

Scanning 2-sided originals

With the Single/2-sided Scan setting, you can choose whether
to scan your originals on both sides. Select from the following
options:

Содержание e-Studio477s








































































































































































































































































Результаты поиска

Содержание e-Studio477s

Отзывы:

Toshiba e-Studio477s, Руководство для продвинутых пользователей, Страница: 91 / 264

Результаты поиска

Содержание e-Studio477s

Отзывы: