Toshiba e-Studio477s Скачать руководство пользователя страница 204

Страница: 204 / 264

SETTING ITEMS (ADMIN)

- 204 -

[TKIP]

— Select this to use TKIP encryption. TKIP

provides a different key for per packet with a message

integrity check. This key will be changed for every fixed
interval.

[AES(CCMP)]

— Select this to use AES encryption. AES

is the next-generation cryptography algorithm that the
U.S. government improves to replace the DES and
3DES.

[DYNAMIC WEP]

— Select this to use an encryption

which automatically updates the WEP key. DYNAMIC
WEP does so periodically as well as automatically.

Note

• To select [TKIP] or [AES (CCMP)], press [WPA] or

[WPA2], or to select [DYNAMIC WEP], press [802.1X].

Memo

• The encryption intensity between each encryption is:

AES(CCMP) > TKIP > DYNAMIC WEP

Specify the following items and press
[NEXT].

• TRANSMIT POWER

Select the low transmit power if you want to limit the area
that the wireless communication is enabled. If you do not
have to limit the area, select [100%].

Confirm the settings and press [FINISH].

Memo

• If you want to change the settings, press [PREV] to

move back to the screen that you want to change and
then repeat the operation.

Press [YES], and wait until the setting is
reflected.

Содержание e-Studio477s








































































































































































































































































Результаты поиска

Содержание e-Studio477s

Отзывы:

Toshiba e-Studio477s, Руководство для продвинутых пользователей, Страница: 204 / 264

Результаты поиска

Содержание e-Studio477s

Отзывы: